USB Multiple Slots
Flash Memory Card Reader
INTRODUCTION
The USB Card Reader which supports not only the widely used flash memory cards, such as Compact Flash card (CF), Micro Drive (MD), Smart Media Card (SMC), Memory Stick (MS), Memory Stick Pro, Secure Digital (SD) and Multi Media Card (MMC), and an extension slot for another special type flash memory. It can be used as a removable storage disk in enormous data exchange applications between PC and PC or PC and various consumer electronic appliances.
Provider : Hama Gmbh & Co KG, 86651 Monheim / Germany
[code : 4 007249 469441]
It was sold 3 euros in 2004 by MediaMarkt at Regensburg.
FEATURES
l USB cable including.
l Support power saving mode.
l Compliant with USB 1.1 & 2.0 port.
l Support Plug & Play and Hot – Swap.
l Support slot-to-slot read/write operation.
l Support auto-detecting slot with card inserted
l Support CF Card / Micro Drive / SD / MMC / MS / MS – Duo / MS – Pro / SMC
l Support Windows 98SE, Windows ME, Windows 2000, Windows XP, Mac OS 10.1.2 or later, and Linux Kernel 2.4.0 or later.
l USB identity : VID = 058F, PID = 9360
m DISK VEN_GENERIC PROD_USB_SD_READER REV_1.00
m DISK VEN_GENERIC PROD_USB_CF_READER REV_1.01
m DISK VEN_GENERIC PROD_USB_SM_READER REV_1.02
m DISK VEN_GENERIC PROD_USB_MS_READER REV_1.03
l Current consommation : 100 mA
The drivers are integrated in application program. Please install software before hardware installation.
DRIVERS
Download the driver for Multimedia Card Reader : setup.exe - made by Alcor Micro,Corp. - version 1.17 (2003-04-10 - 6.02 MBytes)
INSTALLATION
A. SOFTWARE INSTALLATION
Insert the deiced CD into your CD – ROM. Click on the Setup.exe icon, and then the program will be installed automatically. Follow the on – screen instruction as below:
1. Double click the Setup.exe icon:
2. Press “ Next “
3. Installation complete. Press “ Finish “ to close.
B. HARDWARE INSTALLTAION
After installing the software, use the USB cable to connect the USB Card Reader and USB host port. Few seconds, Windows will detect the USB Card Reader.
C. START TO USE
After installation, please start “ Windows Explorer “. Insert the memory card and start to read / write data.